Now, during the holidays, it is a bit of time to copy the time stored on magnetic tape image and sound to new media.
The video recordings of the early 90s were still analogue on 8mm tapes instead. No, not Super8 (that was the movieformat like in cinema those times but much smaller), but on Video8 or HI8 (the better quality variant – comparable to VHS and SVHS, where the “HI” or the “S-” technically by a separate recording of the Y – and C- signal was realized (Y = luminance, so brightness information and C = chrominance, ie color information) .The recording itself, took place on magnetic tape in helical-scan technology (as well as VHS, U-Matic, Betamax, BetaCam, Video2000…). Except that the tape just has a width of 8mm and not 1/2 “or 1 inch, as with other systems. Also the sound is recorded in the helical scan.
In order to get the old records into a digital format that is common today, you need the following four things.
First, the tape (cassette) with the probably exciting content of days gone by. Next, a player is needed.
Here I got myself a then professional HI8 recorder, with which the playback of the tapes should work. The recorder is called EV-S9000E from Sony and came back to the net after almost twenty years break. After a short while, the smell of putrid fish was noticeable. An indication that some electrolytic capacitors of the SMD design are no longer in order. (A well-known problem with devices of older age and elko’s smaller, more compact design.) Nevertheless, I left the recorder on the net and made myself smart, which functions failed because of the numerous, not value-accurate components. So the power supply started and delivers at least. The flourescence indicator has failed. The 60V anode voltage seems to be missing here, no matter the tape drive works, so bring the analog signal to the computer.
For this I got myself a video to USB converter of elgato. Quickly installed the necessary software and inserted the first tape and pressed “Play”. The picture, however, was a disaster. All lines were totally distorted and offset. (As if the line frequency was wrong). So, before I put everything together again and disappear with the recorder in the workshop, I have again seen in the Config menu of the recorder. There I switched all AUTO options to manual, the television standard on PAL geknüppig and last but not least the TBC (TimeBaseCorrector) off. Lo and behold, the TBC is over too. Actually he should generate an absolutely stable time signal for the video line, but with defective electrics this is no longer possible.
Since I do not have ten tapes to digitize, the recorder should hold out …
Some time ago I wrote a post about the Amiga Genlock “VESONE”. It can be found under the title “Amiga and Genlock”.(link)
Apparently there are still some people who own such a device and want to use it again. But since, as with me, the necessary cables, software etc. are not necessarily stored where the device is, it can be difficult. I thought to myself that it doesn’t matter, because what is the Internet for – but far from it. You won’t find anything. I noticed that now when a blog visitor asked me about the pinout of the RGB to genlock cable. I didn’t find anything on the net. But deep in the boxes in the cellar in various cable boxes, I was lucky. The cable appeared. In order to share the pin assignment with other retro fans, I have drawn out the pin assignment and put it online here.
From my youth, these three red boxes came to this article. A relic from the basement of my parents’ house. These are the electronic experiment boxes from Busch. These are the boxes “Compact studio 2060”, the “supplementary package 2061” and the “digital-technik 2075” box.
Busch electronic 2060, 2061 und 2075
The kits are in a relatively good condition, although I’ve made plenty of it as a budding teenager.
The first, so the basic box 2060, I got in the elementary school once for Christmas (must have been so about 1979 – 80), because the predecessor modular system of Philips for lack of knowledge and my urge to experiment unfortunately did not bring the success. (There was one of the transistors quickly broken and nothing worked anymore …) So my parents have looked for a new modular variant, with which I came as an 8-year-old then also coped perfectly. (Of the Philips kits, unfortunately, only fragments and parts of the base plate exist – but I’m currently in the bay looking for a copy of this kit.)
Back to the bush system:
As you can see in the photo, just about all parts are still present. Neatly I have then combined the two boxes 2060 and 2061 to a box. (Unfortunately)
The company Busch advertised at that time with the following slogan: “Experiment without prior knowledge!”
The instruction books were structured in such a way that one quickly came to a sense of achievement and could then also think about the technical background. From the description of the boxes:
The “compact studio” 2060 offers about 40 experiments and circuits, such as: “Electronic mini organ, alarm and rain warning systems, automatic flashing and timer, tone generator and audio amplifier,
Sensor key, voltage tester, remote-controlled electronic relay, siren and room switching, light organ principle circuit. ”
One year later, I got the expansion box 2061. With that, experiments such as radio receivers were possible. From the MW and LW receivers to the FM FM receivers, where the inductors for the oscillating circuits themselves had to be wound (of course strictly according to plan).
Also, the 2061 is in good condition, unfortunately, the plastic retaining clips of the smoked glass plastic cover are broken, so that it rests only on the housing.
Here is now plenty of room for the multitude of experiments. Nicely tidied up, with a media panel with built-in potentiometer, variable capacitor for the receiver tuning stories. The loudspeaker is now also integrated in the housing, as well as a slide switch, a moving coil meter and a 5-pin diode socket. (That was a standard for audio connectors at the time).
Again, I tinkered in my childlike carelessness and integrated the LED and a 3.5mm and a 2.5mm jack into the control panel. Unfortunately, this does not look very professional and destroys the originality of the kit.
Another step was the entry into digital technology with the box 2075.
Here experiments such as: a 1-bit memory memory, counters with 7-segment LED display, random generators, etc. are built.
The power supply was provided for all experiment boxes with a 9V block battery. As an option, Busch also offered a power supply unit at that time.
Before it lands in the archive, I have to put it here too …
It is a hard drive from the 90s (exactly 21.10.1991) – namely a 2.5 inch disk from Seagate with the incredible storage capacity of 85.3 MB (yes MEGABYTE). In comparison, a 160 GB (Gigabyte) disk from Fujitsu in 2007.
The Seagate disc with the designation ST-9096 was installed in a Commodore Amiga 1200. It kept the complete Amiga OS 3.1 including plenty of applications space. At that time you could not get that 85MB so easy.
To the technical data: If you want to format it today, you should know the following parameters: 980 cyl, 10 heads, 17 sectors gives a capacity of 85,299,200 bytes. The HDD has a power consumption of 2W in read / write mode and 1W in idlemode. 300mW still consumes it in sleep mode.
Interesting is perhaps even the size comparison to current records.
The interface complies with the IDE standard (Integrated Drive Electronics).
Größenvergleich
/- 44-pin I/O Connector (* see below)
| o o
::::::::::::o::::::::1 o o
=P=W=A===========#==================
| | |
pin-20 removed for keying ---------------/ | |
| |
| |
Drive is Master, no Slave drive present ------------------ 0 0
Drive is Master, Seagate Slave drive present ------------- 1 0
Drive is Slave to another ST9xxxA/ST9xxxA Master --------- 0 1
Reserved Position (Do Not Use) --------------------------- 1 1
* Drive uses +5vdc power supplied to the drive
via the interface connector. The drive does
NOT make use of a +12vdc power line.
pin-41 +5vdc (Logic)
pin-42 +5vdc (Motor)
pin-43 Ground
pin-44 Reserved
I recently updated my home network a bit and swapped the old Netgear ReadyNAS Duo for a QNAP TS420. Since the supplier wanted to have a “rating” on the article, I indulged myself in the five minutes and wrote a few lines …
I opted for Qnap based on a recommendation from an IT colleague and because I was also looking for a new, more powerful NAS that also supports WakeOnLan. The NAS server should be able to be remotely powered up from the road. But this only works if the mains voltage of the NAS is not interrupted in the switched-off state (for example, by a Lan-controlled power strip). Furthermore, the router must support the forwarding of the MagicPacket.
A great feature of QNAP is TV streaming to the home network. You can plug a DVBT stick to one of the three USB sockets and then install a small tool on the NAS.
The Terratec Cinergy Piranha is NOT supported. Unfortunately, very few DVBT sticks are compatible and recognized. So if you want to use this feature: Be sure to see the website for the compatible sticks. Of the APPs that can be installed on the QNAP, there’s plenty of … OwnCloud, all sorts of webapps and servers, downloaders … Everything is available on network protocols. There is also a quota management for each share or each user.
To the noise: The noise-volume of the NAS depends only on the volume and especially the temperature of the hard disks used. Here I would recommend to use only real server disks, otherwise the SMART status of the disks will quickly display an “ATTENTION” or “WARNING”. A problem that occurs every now and then: After booting, sometimes the web service will not start and the NAS will not be accessible through the browser. The shares are always there. However, a reboot always fixes the problem. (at least until now 🙂 A future firmware update should fix the problem. (meanwhile this problem is solved due to updates 2015)
Slowly, it is time to archive all the tech stuff you have to deal with on a daily basis and always had to do before, in a blog. Above all, when I’m in my parents’ house, I always find interesting things from my childhood and adolescence …
And since you are always on the move with a mobile office (ie a smartphone) anyway, you can try to capture these things … let’s see how far that works. The information here on the blog merely represents an ‘archival’ of small projects and events I’ve dealt with over time.
Remark: This is NOT a scientifically edited blog.
Incidentally, the picture here shows a small project with an old oscilloscope tube (Braun tube), which I wanted to bring back to life … more information will be available later.