{"id":7511,"date":"2022-04-08T07:50:57","date_gmt":"2022-04-08T06:50:57","guid":{"rendered":"https:\/\/blog.fh-kaernten.at\/ingmarsretro\/2022\/04\/08\/selfmade-nixiclock\/"},"modified":"2022-04-08T07:51:46","modified_gmt":"2022-04-08T06:51:46","slug":"selfmade-nixiclock","status":"publish","type":"post","link":"https:\/\/blog.fh-kaernten.at\/ingmarsretro\/2022\/04\/08\/selfmade-nixiclock\/?lang=en","title":{"rendered":"Selfmade Nixiclock"},"content":{"rendered":"
<\/div>\n

<\/path><\/svg><\/i> \"Loading\"<\/p>\n

<\/div>\n

The fact that the topic of retro has become more and more of a trend in recent years has not escaped me either. The „Industrial“ and „Steam“ style has also found its way into many households. People put many things on the shelf again, which represent the robust technology and the appearance of the past decades. For example, LED lamps flicker in the rooms, which were visually modelled on the light bulbs of the Wilhelminian era. The brass lamp holders are held in place by a cable sheathed with fabric mesh. Instead of the carbon or tungsten filaments in the bulbs, modern LED filament works. Thematically corresponding to this style, mechanical watches and electric clocks with illuminated displays of all kinds, for example, are in demand again. In keeping with this trend, I have already reported on the VFD watches in older blog posts. (VFD = VaccumFLuoreszenzDisplay) Until the end of the 90s, for example, this display technology was still frequently used in video recorders, hi-fi devices and various radio alarm clocks. After that, LED and LCD technology was standard. Today, the small OLEDs are finding their way everywhere. As part of the Retro Revival, VFDs are assembled into watches in the form of single-digit display tubes. These watches are available as finished devices or as kits (grother.de). Since these display tubes are no longer manufactured and only old stocks (new old stock) are available, prices are also rising. But it is even worse in terms of price – a technical development from the 1920s is a display technology based on the principle of the glow lamp. In this case, in a glass flask filled with noble gas, a digit bent from wire is attached as a cathode, in front of a thin metal grid as an anode. If a voltage is applied, the noble gas begins to glow along the wire formed as a digit. Seen from the outside, this creates the impression of a luminous number. In such a tube, the digits from 0-9 are usually accommodated and for each digit there is of course a separate connection. Many of the readers will surely know this type of tube. It is called NIXIE – display tube (comes from the designation „Numeric Indicator eXperimental No. 1“<\/p>\n

\"\"<\/a><\/p>\n

A watch with such display tubes is still missing in my collection. So I wanted to own one. But buying is easy – and also very expensive. So I decided to build a Nixie clock myself. It all started with a lengthy search for the tubes, because even for these you have to lay down a lot in the meantime. And I need at least six pieces, because my watch should also have a second display. So I searched the Internet on various platforms – and in the bay I found what I was looking for. There a board equipped with Nixie tubes was offered, which was broken out of some old device. The function of the board was given as „unknown“ – but it was very cheap. The seller had two of them. So I risked it and bought the two boards equipped with five Nixies each.<\/p>\n

\"\"<\/a><\/p>\n

The tubes were then successfully soldered out with some caution. The type of tube is the Z574M, for which you can also find the data sheets in the network and thus also has the socket circuitry.<\/p>\n

\"\"<\/a>With the help of the wiring, it can then be easily contacted and thus check digit by digit of each tube. The characteristics of the 574 are:<\/p>\n

    \n
  • \n
    Anode ignition voltage: 150V<\/div>\n<\/li>\n
  • \n
    Anode burning voltage: 140V<\/div>\n<\/li>\n
  • \n
    Anode extinguishing voltage: 120V<\/div>\n<\/li>\n
  • \n
    Max anode voltage: 170V<\/div>\n<\/li>\n
  • \n
    Cathode current min: 1.5mA<\/div>\n<\/li>\n
  • \n
    Cathode current max: 2.5mA<\/div>\n<\/li>\n<\/ul>\n

    \"\"<\/a><\/p>\n

    With a suitable power supply unit, I was able to quickly set the necessary supply voltages for the functional test.<\/p>\n

    \"\"<\/a><\/p>\n

    You can see here that the tube draws a current of 2.8mA at a burning voltage of just under 140V. This corresponds to an output of 392mW. So if I extrapolate and all six digits of the watch are continuously energized, then the power supply for the tubes must bring about 2.3W.<\/p>\n

    \"\"<\/a><\/p>\n

    So the tubes already work. Now I can think about what the clock should look like and even more how I want to design it.<\/p>\n

    The idea is that a microcontroller should control all six tubes. I want to realize this with 8-bit 4094 shift registers, of which four bits each are used for a tube. These four bits from the shift register should then control the tubes via binary coded decimals (i.e. BCD). However, since the tubes have a connection for each digit, ten separate digit controls must be generated from the four BCD lines. This will be done by a CD4028. The IC CD4028 is a „BCD to Decimal Decoder“. To switch the relatively high voltages of the Nixies, the BCD decimal decoder will drive a suitable transistor. This is where the MPSA42 will do its job. This is an NPN bipolar transistor with a collector-emitter dielectric strength of 300VDC at a maximum collector current of 500mA. In order to be able to use the tubes as flexibly as possible, I have come up with the idea of designing a separate circuit board for each tube. These individual display boards should then be plugged into a main patine. So if a digit is defective, you can simply pull out the board in question and repair it. Then you don’t have to solder around the motherboard.<\/p>\n

    The microcontroller should find space on the motherboard. The low- and high-voltage supply and the shift registers are also to be accommodated on the mainboard. The display boards only carry the Nixie tube and its driver transistors and the BCD decimal decoder. By means of post connectors, they should be easy to plug into the motherboard. To make these formulations a little easier, I have made this sketch:<\/p>\n

    \"\"<\/a><\/p>\n

    Based on this idea, I now began to draw the circuit diagrams. So it started with the display board on which the tube is located. The circuit design is very simple. Two opposite post connectors should give the board a stable hold on the motherboard. One of the connectors supplies the BCD decimal decoder (CD4028N) with the four data inputs and the 5V supply voltage for the logic. On the other side of the board, the „high voltage“ is provided for the tube.<\/p>\n

    \"\"<\/a><\/p>\n

    From this I could then simply create a layout and then produce it as a prototype as a board.<\/p>\n

    \"\"<\/a><\/p>\n

    Nach dem \u00c4tzen und Best\u00fccken der ersten Platine und f\u00fcnf Weiteren war der erste Schritt der Nixieuhr getan:<\/p>\n

    \"\"<\/a><\/p>\n

    \"\"<\/a><\/p>\n

    In order to test the first part of the work, I had a DEB100 digital experiment board available at my workplace. The following short video shows the test result:<\/p>\n