Tag Archives: homefiler

something for the home network

I recently updated my home network a bit and swapped the old Netgear ReadyNAS Duo for a QNAP TS420. Since the supplier wanted to have a “rating” on the article, I indulged myself in the five minutes and wrote a few lines …

 

I opted for Qnap based on a recommendation from an IT colleague and because I was also looking for a new, more powerful NAS that also supports WakeOnLan.
The NAS server should be able to be remotely powered up from the road. But this only works if the mains voltage of the NAS is not interrupted in the switched-off state (for example, by a Lan-controlled power strip). Furthermore, the router must support the forwarding of the MagicPacket.

A great feature of QNAP is TV streaming to the home network. You can plug a DVBT stick to one of the three USB sockets and then install a small tool on the NAS.
The Terratec Cinergy Piranha is NOT supported.


Unfortunately, very few DVBT sticks are compatible and recognized. So if you want to use this feature: Be sure to see the website for the compatible sticks. Of the APPs that can be installed on the QNAP, there’s plenty of … OwnCloud, all sorts of webapps and servers, downloaders … Everything is available on network protocols. There is also a quota management for each share or each user.


To the noise: The noise-volume of the NAS depends only on the volume and especially the temperature of the hard disks used. Here I would recommend to use only real server disks, otherwise the SMART status of the disks will quickly display an “ATTENTION” or “WARNING”.

A problem that occurs every now and then: After booting, sometimes the web service will not start and the NAS will not be accessible through the browser. The shares are always there. However, a reboot always fixes the problem. (at least until now 🙂 A future firmware update should fix the problem. (meanwhile this problem is solved due to updates 2015)

PDF Converter    Sende Artikel als PDF